User's Manual

2
Package Contains
Your DC-2093 Mouse package includes the following:
1. DC-2093 Mouse (Transmitter)
2. DC-2093 Mini Receiver
3. User’s manual
4. 2 AA batteries
Note：If any part is missing, please contact your dealer for a replacement
immediately.
Precaution
! The optical mouse can not work on a glass or mirror surface. Avoid operating this
mouse on a glossy surface, otherwise, this mouse may not operate normally.
! For consideration of saving battery power, it is strongly recommended to operate an
optical mouse on a bright surface with fine texture to obtain lower power consumption of
the Agilent high illumination LED. A very dark surface will cause higher power
consumption.
! For optimal performance, place the receiver at least 8 inches or 20 centimeters away
from other electrical devices, such as the computer, the computer monitor, speakers or
other external storage drives.
! For a better transmission distance, avoid to use this device on a metal plate or
desktop because a large surface of iron, aluminum, copper and other metal will be a
shielding or ground to the RF antenna of the mouse and receiver. Operating on a metal
may cause the transmission distance shorter.
! If your notebook computer has a metal (contains Al or Mg) case, the metal housing of
the LCD panel will isolate partial radiation of the RF signal from the mouse. This will
possibly result in reducing the distance of transmission when you operate the mouse right
in front of the notebook, and the receiver is connected on the back of the notebook.
However, the RF mouse should work properly while you are operating the mouse just
beside your notebook computer.
Installation Guide
Step 1. Connecting the Receiver
By using this DC-2093 mouse, you need to keep a free USB port for the included
receiver.
Please follow the steps below to finish the connecting:
1. Prepare your original Microsoft Windows CD.
2. Plug the USB connector end of the receiver into a USB port.