User's Manual

2. Press and hold the Connect button on the bottom of the mouse for more than 2

seconds. (The red light will go off while the Connect button is depressed.)

3. Wait until the red light flash once. Release the Connect button.

4. Now, the mouse is in power off mode. No operation can be done.

Power on the mouse

To activate the mouse again, press the Connect button on the bottom of the mouse once.

(DO NOT depress the Connect button for more than 1.5 seconds when resuming the

mouse from power off mode.) The red light will turn on, and the mouse is ready for

normal operation.

Operations on power saving mode

In order to conserve battery power, the mouse is designed to reduce power consumption

gradually from standby mode to sleep mode, if it is not operated.

Standby mode – Around 2 seconds after the mouse stops moving, it enters standby

mode.

Sleep mode – If the mouse is left intact for around 10 minutes, it goes to sleep mode and

shuts down the optical sensor to maintain minimum power consumption. No moving

operation is possible in this mode.

Wake up the mouse

This mouse can work promptly under standby mode, so, users might not be able to tell the

existence of this mode. But, in sleep mode, users have to press any button to wake up

the mouse for normal operation.

GENERAL SPECIFICATIONS

z 800dpi hardware resolution

z Digital Radio Frequency wireless mouse with receiver

z 2 channels and 256 ID selections for your options to prevent interruption

z 3 buttons design with scrolling wheel

z Ergonomic design for comfortable grip