STANDARD RF OPTICAL MOUSE USER’S MANUAL Model #: DC-1095 1
Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: z Take frequent breaks, Get up and walk around several times every hour. z Vary your tasks throughout the day. z Keep your shoulders relaxed with your elbows at your side.
Precaution ! Although this RF mouse comes with a 1.2V rechargeable battery, it is also possible to use a standard AA size battery. But be sure not to put the mouse on the charger when a standard AA battery is installed in the battery chamber. ! For optimal performance, place the receiver at least 8 inches or 20 centimeters away from other electrical devices, such as the computer, the computer monitor, speakers or other external storage drives.
Before you using the wireless mouse, please select the same RF channel (indicated by A and B) by sliding the switch to A or B on both receiver and mouse. (See Fig. 3.1 and 3.2 for the location of channel switch.) Step 3. Connecting the power 1. Connect the AC plug of power adaptor into AC power outlet. 2. Connect the DC output connector of the adaptor into the female DC jack on the back of charger. 3. Then the red LED will be lighten on. Step 4. Full charge the batteries 1.
Channel switch (Inside the battery cover) ID switch ID switch Fig-3.2 Fig-3.1 GENERAL SPECIFICATIONS z z z z Digital Radio Frequency wireless mouse with receiver 2 channels and 256 ID selections for your options to prevent interruption 5 buttons design for multimedia purpose to immediately play Ergonomic design for comfortable grip Electromagnetic Characteristics (EMC) FCC ID: This unit complies with Part 15 of FCC Rules.
Transmitter z z z z z Distance: 3 feet typical Power: 1.
Troubleshooting 1. Mouse does not function If mouse is not functional, please turn off the computer first. Check the receiver and make sure it is firmly attached to the USB port of the computer. Check the placement of the battery and see if it is properly connecting. The "+" and "-" ends of the battery must match the "+" and "-" on the slots. If the battery is not inserted correctly, the device won't work. Restart the computer again. 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
