User's Manual

Default USB mode
1. Plug the USB cable connector of charger into a USB port of your PC system.
2. Turn on the computer, if it is off.
3. If you have not registered the USB receiver to your computer, and you are running
Windows 98SE, please have your original Windows CD in hand, and follow
Windows’ instructions to finish up the registration of a new USB device.
PS/2 mode (Optional)
If you purchased a combo mode (USB+PS/2) wireless optical mouse, there comes a
USB to PS2 adapter with your mouse set. You can easily identify the PS2 end and the
USB receptacle of the adapter.
Please follow the steps below to finish the connection:
1. Turn off your computer, if it is on.
2. Remove your current PS/2 mouse.
3. Plug the USB cable connector of the charger into the USB receptacle of the adapter,
and plug the PS2 end of the adapter into the PS/2 mouse port of your computer.
4. Turn on the computer, and the receiver (now in PS/2 mode) will be automatically
recognized by the system.
Step 4. Full charge the batteries
10