User's Manual

12
Transmitter
 Distance: 3 feet typical
 Power: 2.4V DC (Two AAA size of Ni-MH Rechargeable battery)
 Carrier Frequency: 27 MHz
 Dimensions: 120*65*36 mm
 Weight: 99 grams
Charger
 Charging Current: 110mA ±10mA
 Power: 5VDC, 450 m A
 Dimensions: 42*31*13 mm
 Weight: 124 grams
ELECTRIC SPECIFICATIONS
 Operating Voltage Transmitter: 2.4 V DC (powered by batteries)
Receiver: 5V DC (powered by USB port)
 Operating Current Transmitter: 45mA, operate on a white paper
Receiver: 16mA typical
 Standby Current 6mA
 Sleep Current 240uA
 Modulation Type FSK
Troubleshooting
1. Mouse does not function
 If mouse is not functional, please turn off the computer first.
 Check the receiver and make sure it is firmly attached to the USB port of the
computer.
 Check the placement of batteries and see if they are properly connecting.
The
"+" and "-" on the batteries must match the "+" and "-" on the slots. If the
batteries aren't inserted correctly, the device won't work.
 Restart the computer again. If the LED inside the receiver does not light up
when moving the mouse, please re-connect the mouse to the receiver.
 Q: The mouse cursor can be moved only left & right during operation (it could
Be caused by low battery or the optical sensor’s data error).
A: Please take out one of batteries and put it back for a power reset and then
redo the connect procedure.