User's Manual
Table Of Contents
3
Installation Guide (Mouse)
Step 1. Inserting the Batteries
1. Remove the battery cover by.
2. There are battery outlines etched in the battery compartment. Carefully follow
the signs to place the batteries. Do not reverse the polarity!
3.Place the battery cover back and make sure it is firmly Closed.
-
+
Step 2. Synchronize the RF Mouse
Once the batteries are fully charged, remove the mouse from the cradle. If the
mouse is in sleep mode, click the mouse button once to wake it up.
1. Bring the mouse within 1 ft range from the receiver, Hold the mouse
upside-down and use a pointed object, such as a pen tip, to click the
“CONNECT” button once. Do Not depress the CONNECT button longer then
1.5 seconds. (The red sensor light will go off when the “CONNECT” button is
pressed down.)