User's Manual

9
Charger base
This fantasy design of panted charger base is an ideal accessory to your PC system
with an RF optical mouse.
This charger base is proposed to be used with the above Specified model of
Wireless Optical Mouse.
Two-port USB Hub is also available in this charger base as an option.
Keep this guidance for future reference!
Precaution
For optimal performance, place the receiver & charger base at least 8 inches or 20
centimeters away from other electrical devices, such as a computer, a computer
monitor, speakers or other external storage drives.
Installation Guide (Charger base)
Step 1. Installing the rechargeable batteries
To use the charger base, you have to replace the original disposal AAA batteries in your
wireless optical mouse with qualified rechargeable batteries. To replace the batteries,
please follow the steps below:
1. Remove the battery cover by pressing the opening tabs and pulling the battery
cover out. Pull out your original disposal batteries.
2. There are battery outlines to indicate battery's positive and negative ends. Carefully
follow the signs to place the rechargeable batteries.
3. Put the battery cover back and make sure it is firmly closed.
Battery Warning!
When replace the rechargeable batteries, please use heavy-duty Ni-MH rechargeable
batteries only.
Do not mix different type or different brand batteries together!!
Step 2. Connecting the power
1. Plug the AC adapter into an AC power outlet.
2. Connect the DC output connector of the adaptor into the DC jack on the left side of
the charger.
3. There is a green LED beneath the transparent Connect button. It will light up when
the mouse is put on the charger for re-charging.
Step 3. Connecting the charger to PC system