User's Manual

ManualsBrandsDexin ManualsElectronicsWireless Numeric Keypad W/ Built In Optical Mice

User Manu Page 1 of 8 2

Edition

RF Wireless Numeric Keypad w/Built in Optical Mice

USER’ S MANUAL Model #: M071017

Important Ergonomic Information

Some experts believe that using any mouse or trackball may cause serious injury to

hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these

areas, see a qualified health professional.

TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:

F Take frequent breaks, get up and walk around several times every hour.

F Vary your tasks throughout the day.

F Keep your shoulders relaxed with your elbows at your side. Position your

keyboard and mouse so you do not have to reach.

F Adjust your chair and keyboard so your upper arms and wrists are straight.

F Avoid resting your wrists on sharp edges.

System Requirement

F Mouse compatible with Microsoft Windows 2000/ME/XP 3-Button Wheel Mouse

F 3

button and wheel function require Win98/ME/2000/XP

F If your computer’ s operating system is Windows 98/ 98SE, please prepare the

Windows98 or 98SE compact disk for system’ s request during the installation of

mouse.

F 1

, 2

and wheel are compatible with MAC

F Numeric keypad compatible with Microsoft and MAC OS

Before you begin

F Keep this installation guide for future reference! It contains Important

Troubleshooting Information.

F Keep your old PS/2 or USB mouse as back-up devices.

Summary of content (8 pages)

PAGE 1
RF Wireless Numeric Keypad w/Built in Optical Mice USER’S MANUAL Model #: M071017 Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: F Take frequent breaks, get up and walk around several times every hour. F Vary your tasks throughout the day.
PAGE 2
Getting Started Congratulations on your purchase the RF Wireless Numeric Keypad w/Built in Optical Mice. The 800dpi high resolution will bring users the best operation accuracy and efficiency, especially for a display of 1024*768 or higher. It operates at twice the speed and only requires 1/4 of the space in comparison to a 400dpi mouse. By using the advanced RF technology, there is fully 360°operation, no line-of-sight required between receiver and this mouse.
PAGE 3
Installation Guide Step 1. Connecting the Receiver Before using this RF Mouse, you need to connect the included receiver to your computer first. Please follow the steps below to finish the connecting: 1. Turn off your computer 2. Keep a USB slot free for the receiver 3. Plug the USB receiver connector end into the USB port 4. Prepare your original Microsoft Windows CD 5. Turn the power on and then follow the instructions of Windows message for the new USB device connection Step 2.
PAGE 4
This RF wireless mouse provides identification codes to avoid wrong reaction with other same model RF wireless mouse. Before you using the wireless mouse, please set the same ID code for both receiver and mouse. Establish ID connection between the receiver and the mouse. 1. Press and release the “ connect “ switch on the receiver (refer to Fig-2). ID switch button USB Plug, connect to USB port Fig-2 2. Press and release the “ connect” switch on bottom of the wireless mouse (refer to Fig-1). 3.
PAGE 5
Note: a. A low battery indicator in the mouse, if there is the voltage is getting low, the wheel will become red. b. In mouse mode, the LED on the button will light. Numeric keypad function 1. Make sure the connection between mouse and receiver has setup. 2. Start word/ excel or calculator 3. Slide the function to “Keypad” mode. 4. Using as normal numeric keypad. Note: a. If the “Num Lock” indicator on the keyboard in lighting, the keypad works as number key-in or works as arrow movement. b.
PAGE 6
Electromagnetic Characteristics (EMC) Tested to comply with FCC standards For home or office use This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Transmitter l Distance: about 3 feet (1 meters) l Power: 3V DC (2 AAA batteries) l Carrier Frequency: 433.92 MHz l Dimensions: 122X70.
PAGE 7
Troubleshooting 1. Mouse does not function n n n n If mouse is not functional, please turn off the computer first. Check the receiver is firmly attached to the computer mouse port. Check the ID code connection of both receiver and mouse are established. Check if the batteries are properly connecting. The "+" and "-" on the batteries must match the "+" and "-" on the slots. If the batteries aren't inserted correctly, the device won't work. n Restart the computer again. 2.
PAGE 8
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.