User Guide

059-547-00 Rev. F

1/3/07- 4 -

4" High

Tandem Axle

Equalizer

Included in K71-448-00

Shackle Link

Optional End Designs

Non-Grease Lubricated Step Bolt

Bronze Bushing

Grease Lubricated Step Bolt

Shackle Link

Assembly

ELKHART, IND

13-10

13 104

Tandem Axle Equalizer

Included in K71-359-00

and Rear Equalizer for

Triple Axle Kit K71-360-00

FRONT

13-105

Front Equalizer for

Triple Axle Running Gear

Included in K71-360-00

Note: Equalizers not shown are 13-122 included in K71-449-00 and K71-453-00, and 13-126

included in K71-453-00.

Parts Identification:

Hanger Identification:

If Static Bump Clearance is greater than 2.5", a bump stop should be used to avoid overstressing of leaf springs.

Static Bump Clearance of less than 1.5" may limit full suspension movement and result in possible damage to the

frame and/or axles when operating on some rough and uneven road surfaces. Tire clearance should always be

greater than bump clearance to help prevent tire contact to underbody surfaces in the event of a suspension

component failure.

Hanger Identification Chart

Hanger Kit Hanger Part Numbers and Height Dimensions

Boxed Loose

Part No. Part No. Front Height Center Height Rear Height

HGR-104-10 HGR-104-00 028-005-00 3¼" N/A N/A 030-020-00

/32"

HGR-248-10 HGR-248-00 028-005-00 3¼" 029-031-00 3

/8" 028-005-00 3¼"

HGR-348-10 HGR-348-00 028-005-00 3¼" 029-031-00 3

/8" 028-005-00 3¼"