Use and Care Manual

ASSEMBLY INSTRUCTIONS

Use Operation:

Caution:

① Place on smooth ground

② Ensure all latches are locked

③ Ensure the waste holding tank is assembled correctly and the

cap is screwed on correctly.

④ Bearing weight limit is no more than 200 kg

⑤ Do not lean on seat cover when using

1. Open the fresh water holding tank, ﬁll the tank with fresh water

just below the neck mouth and then tighten the cap up.

2. Pull out slide valve before use.

3. Depress bellows pump one or more times to rinse bowl after

brush if necessary.

4. Close slide valve by pushing fully for next use.