Instructions / Assembly

4
ASSEMBLY INSTRUCTIONS
Use Operation:
① Place on smooth ground.
② Ensure all latches are locked.
③ Ensure the waste holding tank is assembled correctly and the cap is
screwed on correctly.
④ Bearing weight limit is no more than 200 kg.
⑤ Do not lean on seat cover when using.
① Fill the tank with fresh water.
② Open slide valve.
③ Open seat cover.
④ Press piston pump for flushing.
⑤ Close slide valve.
● Place on smooth ground
● Ensure all latches are locked
● Ensure the waste holding tank is assembled correctly and cap is
screwed on correctly.
● Bearing weight limit is no more than 200 kg
● Do not lean on seat cover when using
Cau�on:
Use opera�on:
!
Caution: