Instructions / Assembly

Wall Lamps
3019-800
WARNING:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
* Check for electric, gas, & plumbing lines before drilling or consult a professional.
* Turn off your electricity at the circuit breaker or main fuse box before installation.
* Do not restore power to the line until fully installed.
* Do not exceed the recommended wattage.
INSTALLATION MANUAL
3. Install the light fixture on the wall.
Use screws to fix the light to the
To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE.
The lighting fixture is meant for indoor use.
Please read the installation instructions carefully and
follow the steps:
1. Cut off the power.
Fix the crossbar to the electric box with screws.
crossbar already mounted on the wall.
After-sales email:
4. Adjust the light fixture angle with a wrench.
[e-mail]
2. Wiring.
Use copper caps to fix the electrical box's wires to the light fixture's wires.