User`s manual

Hardware Installation

System Memory

Warning:

Electrostatic discharge (ESD) can damage your system board, proces-

sor, disk drives, add-in boards, and other components. Perform the

upgrade instruction procedures described at an ESD workstation only.

If such a station is not available, you can provide some ESD protec-

tion by wearing an antistatic wrist strap and attaching it to a metal

part of the system chassis. If a wrist strap is unavailable, establish

and maintain contact with the system chassis throughout any proce-

dures requiring ESD protection.

The system board supports 240-pin DDR2 DIMM sockets. The four

DDR2 DIMM sockets on the system board are divided into 2 chan-

nels:

Channel A - DDR2-1 and DDR2-2

Channel B - DDR2-3 and DDR2-4

DDR2-1

DDR2-2

DDR2-3

DDR2-4

Channel A

Channel B