User`s manual

Hardware Installation

PS/2 Mouse and PS/2 Keyboard Ports

These ports are used to connect a PS/2 mouse and a PS/2 key-

board. The PS/2 mouse port uses IRQ12. If a mouse is not

connected to this port, the system will reserve IRQ12 for other

expansion cards.

Warning:

Make sure to turn off your computer prior to connecting or

disconnecting a mouse or keyboard. Failure to do so may dam-

age the system board.

Wake-On-PS/2 Keyboard/Mouse

The Wake-On-PS/2 Keyboard/Mouse function allows you to use the

PS/2 keyboard or PS/2 mouse to power-on the system. To use this

function:

• Jumper Setting:

JP1 must be set to “2-3 On: 5V_standby”. Refer to “PS/2 Power

Select” in this chapter for more information.

PS/2 Mouse

PS/2 Keyboard