User`s manual

Hardware Installation

Driver Installation

You may need to install the proper drivers in your operating system

to use the USB device. Refer to your operating system’s manual or

documentation for more information.

Refer to chapter 4 for more information about installing the USB 2.0

drivers.

Wake-On-USB Keyboard/Mouse

The Wake-On-USB Keyboard/Mouse function allows you to use a

USB keyboard or USB mouse to wake up a system from the S3

(STR - Suspend To RAM) state. To use this function:

• Jumper Setting:

JP2 and/or JP3 must be set to “2-3 On: 5V_standby”. Refer to

“USB Power Select” in this chapter for more information.

• BIOS Setting:

“USB KB Wake-Up From S3” in the Power Management Setup

submenu of the BIOS must be set to Enabled. Refer to chapter

3 for more information.

Important:

If you are using the Wake-On-USB Keyboard/Mouse function for

2 USB ports, the 5V_standby power source of your power sup-

ply must support

≥

1.5A. For 3 or more USB ports, the

5V_standby power source of your power supply must support

≥

2A.