User`s manual

Hardware Installation

The system board supports the chassis intrusion detection function.

Connect the chassis intrusion sensor cable from the chassis to the

chassis open connector. Whenever a chassis component has been

removed, the sensor sends signal to the connector alerting you of a

chassis intrusion event.

Hardware Monitor for Windows

Install the “Hardware Doctor for Windows” utility. By default, the

chassis intrusion detection function is disabled. When enabled, a

warning message will appear when the chassis is open. The utility can

also be configured so that a beeping alarm will sound when the

chassis is open. Refer to the “Hardware Doctor for Windows” sec-

tion in chapter 4 for more information.

Chassis Open Connector

Ground

Chassis signal