User`s manual

BIOS Setup

IDE HDD Auto Detection

Detects the parameters of the drive. The parameters will automati-

cally be shown on the screen.

IDE Channel 0 Master to IDE Channel 4 Slave

If you select ”Auto”, the BIOS will auto-detect the HDD & CD-

ROM drive at the POST stage and show the IDE for the HDD &

CD-ROM drive. If a hard disk has not been installed, select “None”.

Access Mode

For hard drives larger than 528MB, you would typically select the

LBA type. Certain operating systems require that you select CHS or

Large. Please check your operating system’s manual or Help desk on

which one to select.

The settings on the screen are for reference only. Your version may not be

identical to this one.

IDE Channel 0 Master to IDE Channel 4 Slave

To configure the IDE drives, move the cursor to a field then press

<Enter>. The following screen will appear.

IDE HDD Auto-Detection

IDE Channel 0 Master

Access Mode

Capacity

Cylinder

Head

Precomp

Landing Zone

Sector

Phoenix - AwardBIOS CMOS Setup Utility

IDE Channel 0 Master

Item Help

Menu Level

To auto-detect the

HDD’s size, head... on

this channel

↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Press Enter

Auto

0MB