User`s manual

BIOS Setup

Typematic Rate Setting

Disabled Continually holding down a key on your keyboard will

cause the BIOS to report that the key is down.

Enabled The BIOS will not only report that the key is down,

but will first wait for a moment, and, if the key is still

down, it will begin to report that the key has been

depressed repeatedly. For example, you would use such

a feature to accelerate cursor movements with the ar-

row keys. You can then select the typematic rate and

typematic delay in the “Typematic Rate (Chars/Sec)”

and “Typematic Delay (Msec)” fields below.

Typematic Rate (Chars/Sec)

This field allows you to select the rate at which the keys are acceler-

ated.

Typematic Delay (Msec)

This field allows you to select the delay between when the key was

first depressed and when the acceleration begins.

Security Option

This field determines when the system will prompt for the password

- everytime the system boots or only when you enter the BIOS

setup. Set the password in the Set Supervisor/User Password

submenu.

System The system will not boot and access to Setup will be

denied unless the correct password is entered at the

prompt.

Setup The system will boot, but access to Setup will be denied

unless the correct password is entered at the prompt.