User`s manual

BIOS Setup

Power Management Setup

The Power Management Setup allows you to configure your system

to most effectively save energy.

The settings on the screen are for reference only. Your version may not be

identical to this one.

ACPI Suspend Type

This field is used to select the type of Suspend mode.

S1(POS) Enables the Power On Suspend function.

S3(STR) Enables the Suspend to RAM function.

Run VGABIOS if S3 Resume

When this field is set to Auto, the system will initialize the VGA BIOS

when it wakes up from the S3 state. This can be configured only if

the “ACPI Suspend Type” field is set to “S3(STR)”. When this feature

is disabled, the system resume time is shortened but system will

need an AGP driver to initialize the VGA card. Therefore, if the AGP

driver of the card does not support the initialization feature, the

display may work abnormally or not function after resuming from S3.

Phoenix - AwardBIOS CMOS Setup Utility

Power Management Setup

Item Help

Menu Level

↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Suspend Type

x Run VGABIOS if S3 Resume

Video Off Method

Video Off In Suspend

Suspend Type

MODEM Use IRQ

Soft-Off By PWR-BTTN

Wake-Up by PCI Card

Power On by Ring

x USB KB Wake-up From S3

Resume By Alarm

x Date(of Month) Alarm

x Time (hh:mm:ss) Alarm

S1(POS)

Auto

DPMS

Yes

Stop Grant

Instant-Off

Disabled

0 : 0 : 0