User`s manual

BIOS Setup

Set Supervisor Password

If you want to protect your system and setup from unauthorized

entry, set a supervisor’s password with the “System” option selected

in the Advanced BIOS Features. If you want to protect access to

setup only, but not your system, set a supervisor’s password with the

“Setup” option selected in the Advanced BIOS Features. You will not

be prompted for a password when you cold boot the system.

Use the arrow keys to highlight “Set Supervisor Password” and

press <Enter>.

Type in the password. You are limited to eight characters. When

done, the message below will appear:

Confirm Password:

You are asked to verify the password. Type in exactly the same

password. If you type in a wrong password, you will be prompted

to enter the correct password again. To delete or disable the pass-

word function, highlight “Set Supervisor Password” and press <En-

ter>, instead of typing in a new password. Press the <Esc> key to

return to the main menu.

Phoenix - AwardBIOS CMOS Setup Utility

Esc : Quit

F10 : Save & Exit Setup

↑ ↓ → ← : Select Item

Change/Set/Disable Password

X Standard CMOS Features

X Advanced BIOS Features

X Advanced Chipset Features

X Integrated Peripherals

X Power Management Setup

X PnP/PCI Configurations

X PC Health Status

X Frequency/Voltage Control

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Enter Password: