User`s manual

BIOS Setup

Set User Password

If you want another user to have access only to your system but

not to setup, set a user’s password with the “System” option se-

lected in the Advanced BIOS Features. If you want a user to enter a

password when trying to access setup, set a user’s password with

the “Setup” option selected in the Advanced BIOS Features.

Using user’s password to enter Setup allows a user to access only

“Set User Password” that appears in the main menu screen. Access

to all other options is denied.

Use the arrow keys to highlight “Set User Password” and press

<Enter>.

Type in the password. You are limited to eight characters. When

done, the message below will appear:

Confirm Password:

You are asked to verify the password. Type in exactly the same

password. If you type in a wrong password, you will be prompted

to enter the correct password again. To delete or disable the pass-

word function, highlight “Set User Password” and press <Enter>, in-

stead of typing in a new password. Press the <Esc> key to return

to the main menu.

Phoenix - AwardBIOS CMOS Setup Utility

Esc : Quit

F10 : Save & Exit Setup

↑ ↓ → ← : Select Item

Change/Set/Disable Password

X Standard CMOS Features

X Advanced BIOS Features

X Advanced Chipset Features

X Integrated Peripherals

X Power Management Setup

X PnP/PCI Configurations

X PC Health Status

X Frequency/Voltage Control

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Enter Password: