User`s manual

Hardware Installation

2.5 Jumper Settings for Wake-On-Keyboard/Mouse

Positionnement des Cavaliers pour Réveil-Sur-Clavier/

Souris

Jumpereinstellungen für die Wake-On Tastatur/Maus

Jumper JP1 - Wake-on-Keyboard/Mouse

To use the keyboard or mouse to

power-on the system, please follow

the steps below.

1. Set JP1 to 2-3 On, enable.

2. Keyboard/Mouse Power On in

the Integrated Peripherals setup

of the Award BIOS must be set

accordingly. Refer to section 3.10

(chapter 3) for more information.

Warning:

1. If JP1 was previously enabled with a password set in the

KB Power On Password field, and now you wish to

disable the Wake-On-Keyboard (password) function,

make sure to set the Keyboard/Mouse Power On field

to Disabled prior to setting JP1 to disabled. You will not

be able to boot up the system if you fail to do so.

2. The power button will not function once a keyboard

password has been set in the KB Power On Password

field of the Integrated Peripherals setup. You must type

the password to power-on the system.

3. The 5VSB power source of your power supply must

support

≥

720mA (minimum).

1-2 On: Disable

(default)

2-3 On: Enable

123