User`s manual

PCI/ISA System Board

Step 5

Remove the G586OPC from its original packing box.

Be careful to avoid touching all connectors and pins on

the board. Please refer to the handling instructions on

pages 6-8 for proper handling techniques.

Step 6

Insert the SIMMs into the SIMM banks on the

G586OPC. The quantity and location of the SIMMs is

dependent upon the memory configuration and type of

modules you intend to use.

Step 7

Install the CPU. Be sure pin 1 of the CPU is aligned

with pin 1 of the socket.

Step 8

Set the corresponding jumpers.

Step 9

Install the prepared G586OPC system board into the

case and replace the screws.

Step 10

Reinstall all cards and connectors and replace the sys-

tem unit cover. Reconnect all power cords and cables.