User's Manual

a password, system will connect automatically.
3) Use 【Return】button on remote control to close password input screen and cancel
wireless network connection.
e) When system is trying to connect wireless network, connection video and network status
will be shown on the screen.
f) When network is successfully connected, connection mode will be switched to LAN
mode.
1) If system prompts wrong password, please input password again.
2) If wireless network connection is failed, system will try to connect other wireless
network that has been connected successfully before. If system cannot connect any
wireless network ,system will switch to AP mode automatically
4.1.4.3 Device Name Modification
Wireless media box had been set to a default name when it was manufactured. Users can rename
the device using the remote control:
a) Ensure system is on home screen.
b) Press 【Menu】button on the remote control to show the setup menu.
c) Select subsidiary “system setting “item.
d) Press 【OK】button to show subsidiary item of system setting.(As illustrated by picture 20)
e) Use the navigation buttons to move the selection cursor and press ok button to input the
selected character. After name input is complete, use the navigation button to locate the enter
key and press the 【OK】 button to submit the name.
f) 4TV box will return to home screen and the new name will be shown on the top right corner.
Picture 20 Device Name Modification
Please note: you can press 【Return】button on remote control to cancel setup operation.
4.1.4.4 Change Audio Output
You can set audio output mode by remote control and switch it between HDMI, microphone