Owner`s manual

09 Maintenance and service
Replacing bulbs
09
216
5. Press the clamp spring upwards and a little
to the left so that it secures in its catch.
6. Press the connector back in place and refit
the cover.
Side marker lamps and position/
parking lamps
G028409
The bulbs are housed in bayonet holders.
1. Turn the bulb holder anticlockwise and
remove.
2. Pull the bulb straight out.
3. Fit the new bulb by carefully pressing it into
the recess.
4. Fit the bulb holder back in place and turn
clockwise.
Direction indicators
G027089
The bulbs are housed in bayonet holders.
1. Turn the bulb holder anticlockwise and
remove.
2. Press in the bulb, turn anticlockwise and
remove.
3. Fit the new bulb by pressing it into the
recess and then turning clockwise.
Front fog lamps
G027078
1. Switch off all lights and turn the remote
control key to position 0.
2. Turn the bulb holder slightly anticlockwise.
3. Remove the lamp.
4. Fit the new bulb. The profile of the bulb
holder matches the one on the foot of the
lamp.
5. Refit the bulb holder by turning slightly
clockwise. The TOP mark on the bulb
holder must be upward.