Owner`s manual

10 Infotainment system
Audio system functions
10
``
* Option/accessory, for more information, see Introduction.
241
Audio settings
1.
Press the SOUND button
.
2.
Press the SOUND button repeatedly until
you come to the function you wish to set.
Choose between
BASS, TREBLE,
FADER, BALANCE, Subwoofer*,
CENTRE* or SURROUND*.
3.
Use the SELECTOR knob
to adjust the
level. The display shows a scale from min.
to max. position. The middle indicates the
normal position.
NOTE
The level for the centre speaker can only be
set if Dolby Pro Logic II (
DPL II) or three
channel stereo (
3-CH) is selected in the
menu. The level for the Subwoofer can only
be set if
Subwoofer is activated
Programme type Display
shows
Bass
BASS
Treble
TREBLE
Balance between the
left and right-hand
speakers
BALANCE
Balance between the
front and rear speakers
FADER
Bass speaker level
Subwoofer*
Level for centre speaker
CENTRE*
Level for surround
sound
SURROUND*
Surround*
Surround settings govern the spatial percep-
tion of the sound. The settings, including acti-
vating and deactivating for each respective
audio source, are made separately.
The
symbol in the display indicates that
Dolby Pro Logic II is active. There are three dif-
ferent settings for surround sound:
•
Pro Logic II
•
3 channels
•
Off (two channel stereo)
Activating/deactivating surround sound
1.
Press MENU, scroll to
AUDIO MODE and
press ENTER.
2.
Select
SURROUND and press ENTER.
3.
Select
Pro Logic II, 3 channels or Off and
press ENTER.
Dolby Surround Pro Logic II is a trademark
of Dolby Laboratories Licensing Corporation.
Dolby Pro Logic II Surround System is manu-
factured under license from Dolby Laboratories
Licensing Corporation.