User`s guide

EasyTouch Indoor Control Panel Installation and User’s Guide

EasyTouch Indoor Control Panel Buttons

Spa button/LED: For spa operations. Press the Spa button to activate the filter pump, rotate the

pool/spa valve actuators and circulate the spa water (LED on). Press the button again to switch the

filter pump off (LED off). While the valves are rotating into position the filter pump will switch off.

For service or testing purposes, if the heater is enabled in the Heat menu, pressing this button will

also activate the heater. For normal spa operations the heater is automatically switched on with the

filter pump (see Man Heat page 46) regardless of the Heat menu setting. When this button is

pressed the circuit is activated, the LED is on and “SPA” is displayed on the screen with the current

and set point water temperatures. Once the filter pump is switched on it will run for 12 hours unless

it is switched off. When this button is pressed, the LEDs on the outdoor control panel Filter Pump

(F) button, Valves (V) button, and Heater button (if enabled in the Heat menu) will be on. If this

display line is blank, it indicates no spa or pool function is currently active.

Pool Button: For pool operations. Press the Pool (P) button to activate the filter pump, rotate the

pool/spa valve actuators and circulate the pool water and switch on the heater (if enabled in the

Heat menu). Press the button again to switch the filter pump off. While the valves are rotating into

position the filter pump will switch off. When this button is pressed the circuit is activated and

“POOL” is displayed on the screen with actual and set point water temperatures. When the filter

pump is switched on it will run for 12 hours unless it is switched off. When this button is pressed, the

LEDs on the outdoor control panel Filter Pump (F) button, Valves (V) button, and Heater button (if

enabled in the Heat menu) will be on. If this display line is blank, it indicates no pool or spa function

is currently active.

➀

➁

EasyTouch Indoor Control Panel Buttons

You can fully automate your pool, spa, and lighting operations from the EasyTouch Indoor Control Panel or

from the EasyTouch outdoor control panel located at the pool equipment pad. The EasyTouch menu features

let you create customized schedules for your pool and spa equipment, heat temperatures, and chlorination

settings to switch on and off at a set day and time. Scheduled automatic operations can be performed at the

EasyTouch Indoor Control Panel or from the outdoor control panel. For menu options, refer to “EasyTouch

Menu Structure,” on page 9. Before operating the EasyTouch Indoor Control Panel, familiarize yourself with

the LCD status messages and control buttons.



EasyTouch Indoor Control Panel

➁

➅➆

➇

➀

AUTO HEATER

SPA 100°F / 95°F

AIR 70°F FRZ

MON 09:30 AM

➃

➂

➄