User`s guide

61
EasyTouch Indoor Control Panel Installation and User’s Guide
Section 4
EasyTouch Indoor Control Panel Installation
Installing the EasyTouch Indoor Control Panel
Use the following procedure to install the EasyTouch Indoor Control Panel. Read through the installation
procedure before starting.
The EasyTouch indoor control panel provided one touch controls for your pool, spa, lights and other functions
from inside your home or a sheltered location. Select a convenient wall location inside your the house or other
weather-protected location for mounting the control panel.
Drill control panel wall mounting holes
To drill the control panel mounting holes:
1. The control panel is 5 ¾” wide. Using the cutout template (shown on the following page), mark the
two screw locations on the wall for the mounting holes. Drill the two mounting holes. If the screws
are not being screwed into studs, drill 3/16” holes and insert wall anchors as required.
2. Drill a 1 inch hole in the area shown in the template for the communication cable to feed through.