User`s guide

64
EasyTouch Indoor Control Panel Installation and User’s Guide
Mount and Cable the EasyTouch Indoor Control Panel
To mount and connect the communication cable to the EasyTouch Indoor Control Panel:
1. Route the cable through the house wall to the location of the indoor control panel. Pull a working
length of the communication cable out of the wall.
2. Remove the control panel front cover from the back plate: Unsnap the bottom edge of the front
of the control panel cover from the back plate.
Front cover
Back plate
Mounting hole
Hole in house wall for
communication cable
Mounting hole
Unsnap from here to
remove front cover