User Manual

http://www.DFRobot.com
9
第
9
页 共
10
页
9.4. Display Commands
NOTE:
一 Do not use any other commands not listed, or the system malfunction may result.
一 For the details of rte display commands, please refer to AiP31068L datasheet.
10.DESIGN AND HANDING PRECAUTION
10.1.The LCD panel is made by glass. Any mechanical shock (eg. Dropping form high
place) will damage the LCD module.Do not add excessive force on the surface of the
display, which may cause the Display color change abnormally.
10.2.The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD
protective film until the last step of installation.
10.3.Never attempt to disassemble or rework the LCD module.
10.4.Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (eg.
water) may damage the LCD.
10.5.When mounting the LCD module, make sure that it is free form twisting, warping and