Datasheet

ICP-10111
Document Number: DS-000177 Page 9 of 31
Revision: 1.3
3.2 ABSOLUTE MAXIMUM RATINGS
Stress levels beyond those listed in Table 6 may cause permanent damage to the device. These are stress ratings only and functional
operation of the device at these conditions cannot be guaranteed. Exposure to the absolute maximum rating conditions for
extended periods may affect the reliability of the device.
PARAMETER
RATING
Supply voltage, VDD
-0.3V to 2.16V
Supply Voltage, SCL & SDA
-0.3V to VDD 0.3V
Operating temperature range
-40°C to 85°C
Storage temperature range
-40°C to 125°C
ESD HBM
2.0 kV
ESD CDM
250V
Latch up, JESD78 Class II, 85°C
100 mA
Overpressure
>600kPa
Table 6. Absolute Maximum Ratings
3.3 SENSOR SYSTEM TIMING
Default conditions of 25°C and 1.8V supply voltage apply to typ. values listed in Table 7, unless otherwise stated. Max. values apply
over the specified operating range of VDD and over the operating temperature range.
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
COMMENTS
Power-up time
t
PU
After hard reset, V
DD
≥ V
POR
-
170
-
µs
Time between V
DD
reaching V
PU
and sensor entering idle state
Soft reset time
t
SR
After soft reset
-
170
-
µs
Time between ACK of soft reset
command and sensor entering
idle state
Measurement duration
t
MEAS
LN Mode
-
20.8
23.8
ms
Duration for a pressure and
temperature measurement
Table 7. System Timing Specifications