User Manual

User Manual-1.0
Page 59 of 66
 Click on the color picker and click on the area on the
photo that you want concealed.
 Adjust the values for the feather and tolerance as per
your requirement by moving the sliders for these
values backward and forward or by manually entering
the values in the value boxes.
 To undo a change or to make corrections to the
changes made, use the correction tool on the page.
 You could change the brush and feather size by using
the sliders or by entering the values in the value boxes.
 Keep the Ctrl key pressed to activate the correction mode and the Shift key to reset the change.
 At any point of the process, click on ‘After’ to see how the picture will appear after the change is applied and ‘Before’
to view the photo as it was before the change.
 Save the changes by clicking on ‘Save’. This allows you to save a copy of the new file in the path.
Note: Global Chroma is used to apply chroma to a particular selected photo.
Local Chroma
 Click on ‘Local Chroma’ icon located in ‘Edit Photo’ tab in ‘My Designs’ window to give ‘Chroma’ effect to the
selected photo.
 You will be redirected to the ‘Chroma’ window
(a)
(b)
The Chroma option (a) before (b) after
 The Chroma option is useful when you wish to change the background of a photo or conceal some part of the photo to
suit your design.
 The ‘Color Picker’ and ‘Feather’ and ‘Tolerance’ help in using this option.
 Click on the color picker and click on the area on the
photo that you want concealed.
 Adjust the values for the feather and tolerance as per
your requirement by moving the sliders for these
values backward and forward or by manually entering
the values in the value boxes.