User`s manual

5 - 13 5 - 13
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-AD)
5.4 Initial Setting
[Purpose of setting]
The following A/D initial setting parameters are set:
• A/D conversion enable/disable setting
• Averaging process specification
• Average time/Average number of times/Move average/Time constant settings
• A/D conversion starting time setting (Q62AD-DGH)
• Warning output settings (Process alarm setting)
• Process alarm upper upper limit value/upper lower limit value/lower upper limit
value/lower lower limit value
• Warning output settings (Rate alarm setting)
• Rate alarm upper limit value/lower limit value
• Rate alarm warning detection period
• Input signal error detection setting
• Input signal error detection setting value
By performing these initial settings, the sequence program settings are not required.
[Startup procedure]
"Start I/O No. " "Module type" "Module model name" Initial setting
CH Initial setting
[Setting screen]
[Explanation of items]
(1) Setting contents
Set A/D conversion enable/disable, averaging process specification and others
for each channel.
(2) Explanation of command buttons
Make text file
Outputs the screen display in text file format.
End setup
Confirms the setting data and ends the operation.
Cancel
Cancels the setting data and ends the operation.