Tus neeg siv phau ntawv

Using the Remote Control
Battery Replacement
Safety Instructions
Pairing the Remote
1.
Follow instructions for setting
up device. Make sure device is
plugged in and turned off.
2.
Press and hold fan speed and
sleep buttons on remote.
3.
Device will turn on if successful.
1.
Follow the direction and use a screwdriver
to open the battery compartment cover.
2.
Push down the cover.
3.
Remove battery and dispose of properly.
4.
Insert replacement battery.
5.
Install battery compartment cover and
secure with screwdriver.
!
Different types of batteries or new
and used batteries are not to be
mixed
!
Batteries are to be inserted with the
correct polarity
!
Exhausted batteries are to be
removed from the device and safely
disposed of
!
If the device is to be stored unused
for a long period, the batteries should
be removed
!
Non-rechargeable batteries are not to
be recharged
!
The supply terminals are not to be
short-circuited.
Operating range of the remote is
approximately 5 meters.
On/Off
Disinfect
Timer
Fan
Speed
Sleep
Mode
Part Number:
AS04AC-1
Battery Type:
CR2032
Need Help?
0300 373 0739
9 AM– 5 PM, Monday– Friday