Instruction Manual

6 7
Figure 1. Major Components
REMOTE CONTROL
CONTROL PANEL
CHASSIS
HEPA 4-IN-1 FILTER
How It Works
The CleanAire 4 in 1 HEPA-PLASMA Air
Purifier incorporates a 6-stage cleaning
system to help clean the air. A fan
forces air through the unit from bottom
to top. There are six stages to the unit:
•
Stage 1: Plasma Wall Set. The
plasma wall set enlarges the
diameter of particles and generates
an electrostatic magnetic field, thus
improving the downstream filter's
absorption rates.
•
Stage 2: Pre-Filter. Captures large
particulate matter including dust,
pollen, hair and pet dander.
•
Stage 3: Anti-Bacterial Coating.
The anti-bacterial coating kills more
microbes including bacteria and
viruses captured in the filter.
•
Stage 4: True HEPA Filter. The
true High Efficiency Particulate Air
(HEPA) filter captures up to 99.97%
of particles down to 0.3 microns in
diameter.
•
Stage 5: Activated Carbon Filter.
The activated carbon filter traps
odors, gases, and volatile organic
compounds (VOCs).
•
Stage 6: Active Plasma Set . The
active plasma set generates positive
ions and negative ions that are
diffused into the air. These ions
keep killing bacteria and viruses in
the room. As the room is filled with
negative oxygen ions, you will enjoy
a fresh smell - like the forest after a
rain shower. The ozone generated is
well within US EPA safety limits and
the optimum concentration (less
than 0.05ppm).