4175049 Upholstered Bed TM King Black Faux Leather Weight Limit: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. K.T.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
A Headboard T957580 Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts C B F E Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly.
2 1 3 4 5 Hardware Pack Hardware Pack #: T4174049-00 1/4" X 3/4" X 52 1/4" X 1 3/16" X4 1/4" X 1 9/16" X 14 5/16" X 2 1/4" X4 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Attach E to C with w. Repeat the same step for remaining parts E/C. E C The slat holes on part E should be facing upward. X2 3 These two holes should be located at the bottom side.
Step 2 T Attach T and S to C with u. Repeat the same step for remaining parts T/S/C.
A Step 3 Screw v into A and u into B, leave half of the length exposed. 2 1 B Do not completely tighten the bolts, leave half of length exposed.
A Step 4 C 2 Hang C x 2 on A and B as illustrated, don't completely tighten the bolts until STEP 9 is complete.
Step 5 Attach N to Z with x. Repeat this step for all remaining legs Z.
A Step 6 C Attach N x 4 to A, B and C with u.
Step 7 Attach L x 2 to F with u. Repeat the same procedure for remaining parts L x 2 and F.
Step 8 Attach F x 2 to A and B with u .
Step 9 F E . Attach K to E and F with u Then properly tighten all the bolts.
Step 10 10.1 Insert P1 into X; 10.2 Press X into E, repeat the same X X procedure for the opposite side of the bed. Follow the same procedures going backwards for every row of slats. P1 P1 E 10.1 10.2 SLAT WARNING X P1 E Correct: Slat curve should be facing upwards. Incorrect: Slat curve facing downwards.
Step 11 P1 Y P1 Y 11.1 Insert Y onto the ends of P1 assembled P1 F P1 11.1 F in previous step; 11.2 Take a new P1 and insert both ends into the other free end of Y, then press Y X 2 SIMULTANEOUSLY onto F X 2 as illustrated. Follow the same procedures going backwards for every row of slats. 11.2 SLAT WARNING Correct: Slat curve should be facing upwards. Y Incorrect: Slat curve facing downwards.
Helpful Hints Weight Limit: 500 Lb / 227 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old. ● Prohibit jumping and horseplay on this bed.
4175049 NO LO REGRESE A LA TIENDA ! Upholstered Bed Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. King Visite www.dhpfurniture.
Lea antes de comenzar a ensamblar ● Llame a nuestro numero gratuito si necesita asistencia. ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto. ● El número de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. ● Asegúrese de que todas las partes estén incluidas.
Instrucciones Paso 1 Una E con C con w. Repita el paso las otras partes E/C. Paso 2 Una T&S con C con u. Repita el paso las otras partes T/S/C. Paso 3 Atornille v en A y u en B, dejar la mitad de los pernos expuesta. Paso 4 Colgar C X 2 en A&B como se ilustra a continuacion, no apriete completamente los PERNOS hasta que el PASO 9 sea completado. Paso 5 Una la parte N con Z usando x. Repita el paso para las otras Patas Z. Paso 6 Una N X 4 con A, B&C con u. Paso 7 Una L X 2 con F con u.
4175049 NE RETOURNEZ PAS AU MAGASIN ! Upholstered Bed Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. King Visitez www.dhpfurniture.
Avant de commencer l'assemblage ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le plancher et le produit. ● Nombre de personnes recommandé pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main supplémentaire). Le temps d'assemblage estimé est de 1.5 heures.
Instructions Étape 1 Attacher E à C avec u. Répétez la même étape pour les autres C/E. Étape 2 Attacher T&S à C avec u. Répétez la même étape pour les autres T/S/C. Étape 3 Viser les v à A et u à B, laisser la moitié des fil exposée. Étape 4 Accrochez C x 2 à A & B comme illustré ci-dessous, ne serrez pas complètement les vis jusqu'à ce ÉTAPE 9 est terminée. Étape 5 Attacher N à Z avec x. Répétez la même étape pour les Pieds Z. Étape 6 Attacher N x 4 à A, B & C avec u. Étape 7 Attacher L x 2 à F avec v.
