4073139 Modern Canopy Full Metal Bed White Weight Limit: 450 Lb / 204 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34407313900 3
B A Parts C G M Replacement Parts, Visit www.dhpfurniture.com/eng/support-home X All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post 01 T934820 Post 02 T934830 Post 03 T934840 Side Rail T935020 Upper Side Rail T934860 Center Brace T935030 X1 X1 X2 X2 X2 X1 I K T H Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 4 3 2 Hardware Pack 5 Hardware Pack #: T4073139-00 5/16" X 3/4" X 16 1/4" X 3/4" X 16 1/4" X 1 3/8" X2 1/4" X 1 3/4" X4 1/4" X 2 3/4" X8 9 8 7 6 1/4" Nut X2 Wrench X1 1/4" X 1" X4 4mm X1 Hardware Note: Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Step 1 Insert (I) X 2 into (A) with BOLTS 6. Attach (T) to (A) with BOLT 1.
Step 2 Insert (B) onto (I) X 2 with BOLTS 6. Attach (B) to (T) with BOLT 1.
Step 3 Attach (T) to (C) X 2 with BOLT 1.
Step 4 Wide side of the slot should be facing up ! Attach (G) X 2 to (A/C) & (B/C) with BOLT 1.
Step 5 H Attach (H) X 2 to (G) with BOLT 4.
Step 6 3 Attach (X) to (H) with BOLT 3 and NUT 7.
Step 7 S Insert (S) X 4 into (M) X 2 with BOLTS 2.
Step 8 Insert (K) X 2 into (S) with BOLTS 2.
Step 9 Insert sub-assembly (M/K/S) from STEP 8 into (A,B&C).
Step 10 5 Attach (U) X 4 on top of Posts (A), (B) & (C) with BOLT 5.
Step 11 Y 3 2 3 G 2 G Insert (P) into (G) as illustrated, then lock (P) into place with (Y).
W Q W P Step 12 12.1 Press (W) onto (P) as illustrated. 12.2 Attach (Q) to (W) alternating left and right.
Helpful Hints Weight Limit: 450 Lb / 204 Kg For your safety, do not climb or hang on the upper metal rails! Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old.
4073139 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Modern Canopy Full Metal Bed Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Blanco Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 Insertar (A) dentro de (C) con TORNILLOS 6. Una la parte (T) con (A) con Tornillos 1. Paso 2 Insertar (B) dentro de (I) X 2 con TORNILLOS 6. Una la parte (B) con (T) con Tornillos 1. Paso 3 Una la parte (T) con (C) X 2 con Tornillos 1. Paso 4 Una la parte (G) X 2 con (A/C) & (B/C) con Tornillos 1. Paso 5 Una la parte (H) X 2 con(G) con Tornillos 4. Paso 6 Una la parte (X) con (H) con Tornillos 3 y Tuerca 7. Paso 7 Insertar (S) X 4 dentro de (M) X 2 con TORNILLOS 2.
4073139 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Modern Canopy Full Metal Bed Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 1.5 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 Ins rer (A) (C) avec BOULON 6. Attacher (T) (A) avec Boulon 1. tape 2 Ins rer (B) (I) X 2 avec BOULON 6. Attacher (B) (T) avec Boulon 1. tape 3 Attacher (T) (C) X 2 avec Boulon 1. tape 4 Attacher (G) X 2 (A/C) & (B/C) avec Boulon 1. tape 5 Attacher (H) (G) avec Boulon 4. tape 6 Attacher (X) 2 (H) X 2 avec Boulon 3 et crou 7. tape 7 Ins rer (S) X 4 (M) X 2 avec BOULON 2. tape 8 Ins rer (K) X 2 (M) avec BOULON 2. tape 9 Ins rer sous-ensemble (M/K/S) de TAPE 8 (A,C&D).