4439619(Blue) 4439419(Gray) 4439319(Ivory) 4439719(Pink) Upholstered Bed with Storage Chest Twin Weight Limit: Bed: 250 Lb / 113 Kg Seat on Storage: 225 Lb / 102 Kg Storage: 40 Lb / 18 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
Parts For Bed A Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts A1 D C E All in 1 big box! E1 There are inner box(es) that include components required to complete this assembly. Headboard Back fabric Panel X1 Side Panel Side Panel X1 X2 X2 F1 F Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts For Chest K M L Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts N All in 1 big box! There are inner box(es) that include components required to complete this assembly. Chest Panel X1 Q Chest Panel Chest Panel X1 U X2 Chest Cap X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts IMPORTANT: Below part numbers list is unique to your product. Please keep it on hand when calling for replacement parts.
1 2 3 Hardware Pack 5 4 Hardware Pack #: T4439419-00 1/4" X 3/4" X 36 1/4" X 1 1/16" X 16 1/4" X 1 3/8" X 10 1/4" X 1 9/16" X 16 5/16" X 1 7/8" X7 6 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Attach K and L to M X 2 with ❷. Don't completely tighten the bolts until STEP 3 is complete. M L K Holes on slots M/L/K should be facing upward.
Step 2 Attach Z X 4 to Q with ❺.
Step 3 K M Attach Q to M x 2 with ❸. Then properly tighten all the bolts. Q 3 2 Attach Q to K and L with ❷.
Step 4 Attach U and V to M X 2 with ❶.
Step 5 Screw ❶ to N. 1 Do not completely tighten the BOLTS, leave half of the thread exposed.
Step 6 N N V 1 Hang N onto U and V in an inclining position until the bolts rest against the lower side of the slot as illustrated, then fasten ❶. V Screw ❶ to K. V N V N U K Do not completely tighten the BOLTS, leave half of the thread exposed.
Step 7 A Screw ❷ to A. Z Attach Z X 2 to A with ❺. 5 Do not completely tighten the BOLTS, leave half of the thread exposed.
D Step 8 E 8.1 Attach E and E1 to C and D with ❹, 8.2 Attach I to C and D with ❸. Repeat the same step for remaining parts C, D, E, E1 and I. 4 8.1 D The slat holes on part E and E1 should be facing upward. E 4 C 3 I C E1 X2 D 8.
S Step 9 Attach S to D with ❶, Attach T to C with ❶. Repeat the same step for remaining parts C, D, S and T.
Step 10 A Hang sub-assembly C and D on A and K as illustrated, don't completely tighten the bolts until STEP 13 is complete.
Step 11 Attach J X 2 to H with ❶.
Step 12 Attach H to C and D with ❶.
Step 13 5 13.1 Attach F and F1 to A and K with ❶, F1 A 13.2 Attach F and F1 to H with ❺. Then properly tighten all the bolts. 1 F1 F H 13.2 13.1 The slat holes on part F and F1 should be facing upward.
O X X Y O O O G 14.1 14.2 F 14.3 Step 14 14.1 Insert O into X, 14.2 Press X into E/E1, repeat the same procedure for the opposite side of the bed with a new O and X. 14.3 Insert ends of both O into Y, then press Y into F/F1 as illustrated. Repeat the same procedures going backwards for every row of slats. X F1 Y E1 O SLAT WARNING E Correct: Slat curve should be facing upwards. F Incorrect: Slat curve facing downwards.
Step 15 Stick A1 to the back of A with Velcro as illustrated.
Helpful Hints Weight Limit: Bed: 250 Lb / 113 Kg Seat on Storage: 225 Lb / 102 Kg Storage: 40 Lb / 18 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
4439619(Azul) 4439419(Gris) 4439319(Marfil) 4439719(Rosa) Cama tapizada con cofre de almacenaje Individual Fecha de compra Número de lote Gracias por su compra DHP! Información sobre la garantía DHP garantiza que este producto está libre de defectos de fábrica en la mano de obra y el material y se compromete a solucionar dichos defectos. Este producto tiene una garantía limitada de 1 año a partir de la fecha de compra original. Esta garantía se limita a reparar o reemplazar piezas defectuosas solamente.
Partes Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts IMPORTANTE: la lista de números de pieza que aparece a continuación es exclusiva de su producto. Por favor, manténgalo a mano cuando solicite piezas de repuesto. Todo se incluye en 1 caja grande! Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para completar este ensamblaje.
Paquete de componentes Paquete de componentes #: T4439419-00 Nota: Por favor no apriete completamente las piezas hasta que el ensamblaje sea completado, a menos de que se indique específicamente en las instrucciones de paso a paso. Los tornillo(s), perno(s) que se utilizarán en cada paso se muestran en tamaño real en la esquina inferior derecha de cada página. Instrucciones Paso 1 Una K y L con M X 2 con los ❷. No apriete completamente los PERNOS hasta que el PASO 3 sea completado.
Límites de peso: Cama: 250 Lb / 113 Kg. Asiento en almacenamiento: 225 Lb / 102 Kg. Almacenamiento: 40 lb / 18 kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
4439619(Bleu) 4439419(Gris) 4439319(Ivoire) 4439719(Rose) NE RETOURNEZ PAS AU MAGASIN ! Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Lit rembourré avec coffre de rangement Visitez www.dhpfurniture.com/fre/replacement-parts ou appelez au 1-800-267-1739 Simple Date d'achat Numero de lot CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Pièces Pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts IMPORTANT: La liste des références ci-dessous est propre à votre produit. Veuillez le garder sous la main lorsque vous appelez des pièces de rechange. Tout dans 1 grosse boîte! Il y a des boîtes intérieures qui contiennent les composants pour completer l'assemblage.
Quincaillerie Emballage coque #: T4439419-00 Remarque: Ne serrez pas complètement les boulons jusqu'à ce que l'ensemble est achevé, sauf indication contraire dans les intructions étape par étape. les vis & les boulons utilisés dans chaque étape sont présentés en taille réelle dans le coin inférieur droit de la page. Instructions Étape 1 Attacher K et L à M X 2 avec ❷. Ne serrez pas complètement les vis jusqu'à ce ÉTAPE 3 est terminée. Étape 2 Attacher Z X 4 à Q avec ❺.
Limite de Poids: Lit: 250 lb / 113 kg Siège de rangement: 225 lb / 102 kg Stockage: 40 lb / 18 kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
