3273408 Aiden TM Metal Futon Frame Silver Weight Limit: 600 Lb / 272 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34327340800 3
Parts B A Replacement Parts, Visit www.dhpfurniture.com/eng/support-home G H All in 1 big box! D Arm T619610 X1 Arm T619620 There are inner box(es) that include components required to complete this assembly. Middle Leg T611920 X1 Stretcher Connector T612000 Stretcher T611950 X2 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 4 3 2 5 Hardware Pack 6 Hardware Pack #: TFF4177SILS-01 1/4" X 18 5/16'' X4 1/4" X 3/4" X2 1/4" X 1 1/16'' X4 1/4" X 1 5/16'' X 14 5/16" x 2 7/16'' X8 9 8 7 10 #8 X 9/16'' X 20 X1 PAD X8 4mm X2 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Step 1 Attach L to A with and ; Attach R to B with and . B 3 A L The top of Mechanisms (L) & (R) may look different due to the movable joints. Please determine the orientation based on their bottom sides.
Step 2 Insert H into G x 2 with . Repeat the same actions to join another Rail.
Step 3 Attach D X 2 to H X 2 with .
Step 4 Attach sub-assembly G/H x 2 from STEP 3 to A and B with and . Attach to G and H in the locations shown.
P 2 E 7 O Q P Step 5 2 P Q 5 5.1 Join panel O & P with E and . 5.2 Attach Q to O & P with and . 5 5.2 5.
P E 7 O Step 6 12 2 6.1 Join panel O & P with E and . P P 6.2 Attach one end of Q to O & P with Q and . 6.3 Attach the other end of Q to O & P with ⓫ and ⓬. Q 11 5 6.1 6.3 6.
R Step 7 2 2 Attach O to L then P to R with and .
Step 8 Lift the Seat Frame to the Position shown.
Step 9 B Attach O to R then P to L with and .
Step 10 Hook O with P using T X 3.
Step 11 Attach S X 2 to O & P on the seat frame, with as illustrated.
Step 12 You can switch the status of your futon as shown.
Weight Limit: 600 Lb / 272 Kg Helpful Hints ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. ● Do not use risers under this bed. To avoid tipping, do not sit, lie or stand on the edge of the unit when the futon is in sleeping position.
3273408 NO LO REGRESE A LA TIENDA ! Aiden Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Metal Futon Frame Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Plata Fecha de compra Número de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia. ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto. ● El número de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. ● Asegúrese de que todas las partes están incluidas.
Instrucciones Paso 1Una L con A usando y . Una R con B usando y . Paso 2 Inserte H con G X 2 usando . Repita el mismo procedimiento para ensamblar el otro riel. Paso 3 Una D X 2 con H X 2 usando . Paso 4 Una el subconjunto G/H x 2 del PASO 3 con A & B con y . Una con G y H. Paso 5 5.1 Únete panel S & P con E y . 5.2 Una Q con O&P usando y . Paso 6 6.1 Únete panel S & P con E y . 6.2 Una un extremo de Q con O & P usando y . 6.3 Una el otro extremo de Q con O & P usando ⓫ y ⓬.
3273408 NE RETOURNEZ PAS AU MAGASIN ! Aiden Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Metal Futon Frame Visitez www.dhpfurniture.
Avant de commencer l'assemblage ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le plancher et le produit. ● Nombre de personnes recommandé pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main supplémentaire). Le temps d'assemblage estimé est de 1.5 heures.
Instructions Étape 1 Attacher L à A avec et ; Attacher R à B avec et . Étape 2 Insérer H à G X 2 avec . Répéter le procedure pour assembler l'autre Rail. Étape 3 Attacher D X 2 à H X 2 avec . Étape 4 Attacher sous-ensemble G/H x 2 de ÉTAPE 3 à A & B avec et . Attacher à G et H. Étape 5 5.1 Rejoignez panneau O & P avec E et les . 5.2 Attacher Q à O&P avec et . Étape 6 6.1 Rejoignez panneau O & P avec E et les . 6.2 Attacher une extrémité de Q à O&P avec y ; 6.