3266198 TM Metal Loft Bed Twin Silver Weight Limit: 200 Lb / 91 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. J.Z.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
Parts B A C D Replacement Parts, Visit www.dhpfurniture.com/eng/support-home E All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post T921790 Post T921800 Post T921810 Post T921820 Guard Rail T921830 X1 X1 X1 X1 X1 F G Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
M Parts Z U Replacement Parts, Visit www.dhpfurniture.com/eng/support-home All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post Connector T930540 Post Connector T930550 Ladder T921890 X1 X1 X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 2 Hardware Pack 3 Hardware Pack #: T3266198-00 1/4" X 1 5/8" X2 1/4" X 2 3/16" X 12 1/4" X 2 3/8" X3 6 5 4 1/4" X 3/4" X 15 5/16" X 3/4" X8 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 I 2 4 A 1.1 Attach I to A and B with 2 4 1.2 Attach T to A and B with T 1.1 B . . Please do not completely tighten the bolts of Part I & T, in order to easily assemble Parts M in Step 2. 1.
Step 2 Insert M onto A/B. These two holes are in the same side.
I Step 3 2 3.1 Attach I to C/D with 2 4 3.2 Attach T to C/D with T 4 C D 3.1 . . Please do not completely tighten the bolts of Part I & T, in order to easily assemble Parts U in Step 4. 3.
Step 4 Insert U onto C/D. These two holes are in the same side.
Wide side of the slot should be facing up ! 5 5 G Step 5 Attach G to B/C with . Attach H to A/D with .
Step 6 U E 6.1 Attach E to B/C/M/U and F to A/M E 4 with G . 6.2 Then attach E to G and F to H with . 4 1 C 6.2 6.
U Step 7 Attach U to D with .
Step 8 2 Attach N to B/C with .
Step 9 G 1 G 1 2 Y 2 Insert O into G/H as illustrated, then lock O into place with Y.
O Step 10 Q W W 10.1 10.1 Press W onto O approximately in the middle of O as illustrated. 10.2 Press Q onto W alternating left and right as illustrated. 10.
Step 11 Attach Z to H with .
Helpful Hints Weight Limit: 200 Lb / 91 Kg Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Clean the product with a soft damp cloth. DO NOT use harsh chemicals or abrasive cleaners. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
WARNINGS for Bunk Bed Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls. Use only a twin mattress which is 74"-75" long and 37 1/2"-38 1/2" wide. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
3266198 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Metal Loft Bed Individual Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Plata Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones L mites de peso:200 Lb / 91 Kg en la cama superior. Paso 1 1.1 Una la parte I con A y B usando . 1.2 Una la parte T con A y B usando . Por favor, no apretar completamente los pernos en Parte I & T, para facilitar el montaje de las Partes M en Paso 2. Paso 2 Insertar M en A/B. Paso 3 3.1 Una la parte I con C y D usando . 3.2 Una la parte T con C y D usando . Por favor, no apretar completamente los pernos en Parte I & T, para facilitar el montaje de las Partes U en Paso 2.
3266198 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Metal Loft Bed Simple Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 1.5 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 1.1 Attacher I Limite de Poids: 200 Lb / 91 Kg sur le lit sup rieur. A/B avec . 1.2 Attacher T A/B avec . Veuillez ne pas serrer compl tement le boulon sur I & T, afin de faciliter l'assemblage de M dans l'etape 2. tape 2 Insertar M en A/B. tape 3 3.1 Attacher I C/D avec . 3.2 Attacher T C/D avec . Veuillez ne pas serrer compl tement le boulon sur I & T, afin de faciliter l'assemblage de M dans l'etape 2. tape 4 Insertar U en A/B. tape 5 Attacher G B/C avec .
