Remote Starter User Manual

26
Diagnostic Section
Diagnostic Section - How to check and erase the SES light.
To view the specific trouble code, select “DTC information”.
DTC All: View all DTC’s
Specific DTC: Enter DTC to view status
DTC Not Ran SCC: Displays what DTC tests
where not performed
during the DTC check
****General Data****
DTC All
Specific DTC
DTC Not Ran SCC
*Select “DTC All” to view all DTC codes; once viewed, press ESC twice then select
“Erase DTC’s”, your SES light should now turn off as long as the problem is fixed. If
the light remains, the problem still exists, and needs to be diagnosed by a mechanic.
NOTE: Because the PCM performs tests of modules during driving
cycles, some modules are not tested at the time the “DTC All”
command is performed. This feature displays what modules where
excluded during the “DTC All” test. This information always bases
itself from last “Erase DTC’s” command performed.
Abbreviation list :
SES- Service Engine Soon
DTC- Diagnostic Trouble Code
SCC- Since Code Cleared