How to adjust parameters Instruction Manual



Tomakeanychangestoapreloadedtune:

1. AllyouhavetodoisgounderPERFORMANCE/selectthetuneyouwantto

install/MODIFYTUNE/MODIFYPARAMETERS.

Youwillgetalistthatlooks(something)likethis:

NOTE:Thislistisanexampleandcanvarygreatlybyapplication.Todeterminewhata

PredatorORTrinitycanadjustforagiveapplicationgoto

Diablosport.com/Products/Predator/thenthePredatorPartnumberorvehicleapplication.

SincetheTrinityislikemanyPredatorpartnumbersinone,theadjustableparametersare

thesameforagivenapplication.

IdleRPMDrive/Neutral,04‐2010

WOTFuel1k‐3.8k/4k‐5k/5k‐7k

RevLimitDrive/Neutral,04‐2010

WOTSpark1k‐3.8k/4k‐5k/5k‐7k

TireSize

MDSdisable,whereapplicable

ShiftPoints

Speedlimit

LowTirePressureThresholdadjustment,whereapplicable

ElectronicThrottleSensitivity,whereapplicable



2. Selecttheparametersthatyouwanttoadjust,makethechange,andthenhitENTERor

thecenterbuttononthekeypad.

3. Afterthechange(s)aremade,notethattherewillbeanasterisk(*)nexttoaparameter

thathasbeensuccessfullyadjusted(NOTE:IfyouhaveaChrysler/Dodgevehicle,the

PAGE 1
To make any changes to a preloaded tune: 1. All you have to do is go under PERFORMANCE/select the tune you want to install/MODIFY TUNE/MODIFY PARAMETERS. You will get a list that looks (something) like this: NOTE: This list is an example and can vary greatly by application. To determine what a Predator OR Trinity can adjust for a give application go to Diablosport.com/Products/Predator/then the Predator Part number or vehicle application.
PAGE 2
tuner will not put an asterisk next to parameters that can be changed under the Quick Adjust menu). 4. Return to the INSTALL TUNE menu and it will write the tune with the adjustments made. To back up on a Predator, use the ESC button. On a Trinity, use either the ‘Back’ selection on the touch screen, or the two vertically mounted grey buttons next to the touch screen. In most cases, this can be done with any tune loaded onto the tool, including custom tunes.