Specifications

PA/4000 User’s Manual
Section 2, Components
Page 5
Module Slot locations
The PA/4000 Printer/Applicator has
two module slots in the rear of the print
engine for use with optional memory
modules and font modules. The upper
slot is referenced, as “A”
[A]
and the
lower slot is “B”
[B]
.
Print Engine Specifications:
Print Engine Prodigy Plus
TM
Print Method
Direct thermal or thermal transfer
Maximum Print Speed
6 inches/second with afterburner speeds up to 8
inches/second
Print Resolution
203 dots per inch
Media Dimensions,
Min.
1” x .25” (25.4 mm x 6 mm)
Media Dimensions,
Max.
4” x 13” (101.6 mm x 330 mm)
Roll Capacity
13” (330 mm) outer diameter
Fonts
Nine internal fonts. American and European,
uppercase and lowercase with descenders. Six
optional font modules available.
Bar Codes
UPC-A/E, UPC-E, EAN-8, EAN-13, Code 39, I 2/5,
Code 128, Codabar, MSI, 2/5, Code 93, Bookland.
Flexibility
Rotation of bar codes and text in four 90 degree
steps; character expansion horizontally and vertically
to 12X; RAM storage for special characters, dot-
addressable graphics; sequential numbering.
Memory Module
Option
Three optional memory modules available: 256K
RAM, 256 Flash ROM, and 512K RAM.
Communications
RS-232 (300
!
19,200 bps, Ready/Busy and
X-ON/X-Off)
Data Transmission
ASCII
[A]
[B]