Specifications

PA/4000 User’s Manual
Section 2, Components
Page 7
2.3 Air Cylinder/Tamp Head Assembly (6” 6105-180 Shown)
There are three sizes of tamp cylinders
available: 6, 12 and 18 inch. The Air
Cylinder/Tamp pad Assembly attaches to
the extended horizontal support bar on the
PA/4000 main unit. It comes with a spare
tamp pad kit. There are two sensors
[A]
located on the tamp pad:
1. The Label Present Sensor detects when
a label is on the tamp pad. The printer
will not print another label until the
current label has been removed.
2. The Auto-Retract Sensor detects the
product. Once the product is detected,
the air cylinder will retract.
Tamp Pads
Tamp pads are available in a wide range of sizes. The available range runs from
4”x 2” up to 7”x 13” with ¼” increments along the way. As shown below, the
part numbering system for these pads includes the size of the pad in the number:
For example, the part number for a tamp pad using a four-inch wide by two-inch
long label is 6150-223-4000200.
Call Diagraph for pricing and availability.
[A]