Specifications

PA/4000 User’s Manual
Section 2, Components
Page 10
2.7 Optional Components
2.7.1 Secondary Wipe-Down Assembly 6105-103
A secondary wipe-down unit is used when applying labels onto two
adjacent panels of a carton. The primary applicator applies part of the
label onto one surface and the secondary wipe-down roller pushes the
unattached portion onto the second surface.
The PA/4000 supplies both electric (24 VDC) and air (0-100 PSI) power.
The assembly includes bracketry
[A]
; a tee fitting
[B]
; an interconnect
cable
[C]
and a photosensor
[D]
that acts as the signal source to initiate
the cylinder stroke. This assembly also includes the Secondary Wipe-Down
Assembly User’s Manual
[E]
(5802-930) which contains complete
installation and operation instructions.
This unit comes bundled with the PA/4020 or can be purchased
separately.
[A]
[B]
[C]
[D]
[E]