Specifications

Technician’s Guide 2-48
2.5 TESTING THE PA/4000
2.5.1 RIBBON TEST
1. Turn the PA/4000’s power switch to the ON position.
2. Press and hold the following keys in this order: 2nd, STOP/CLEAR, FEED
3. Release all three keys simultaneously.
4. Press the PAUSE/RESUME key. (The ERROR LED will blink).
5. The PA/4000 will now print multiple copies of the label shown in Figure 2-8.
6. Pull the labels away from the present sensor as they print.
Figure 2-8
2.5.2 PRODIGY BOARD SELF-TEST
1. Turn the PA/4000’s power switch to the ON position.
2. Press and hold the following keys in this order: 2nd, STOP/CLEAR, FEED
3. Release all three keys simultaneously.
4. Press the FEED key. (The ERROR LED will blink).
5. The PA/4000 will now print multiple copies of the label shown in Figure 2-8.
6. Pull the labels away from the present sensor as they print.