Specifications

Technician’s Guide 2-49
THU NOVEMBER 17, 1994 12:25 321
VER BA - 03.02 04/08/94
SYSTEM ROM CHECKSUM 8F7B IS GOOD
FONT ROM CHECKSUM 2E7A IS GOOD
TOTAL ROM CHECKSUM BDF5 IS GOOD
SYSTEM RAM CHECKS GOOD
SERIAL PORT BAUD RATE IS 9600
TRANSFER SWITCH IS ON
SETUP SWITCH 1 2 3 4
5678
OFF OFF OFF
OFF OFF OFF OFF OFF
ANALOG INPUT VALUES:
PAPER: 236 EDGE: 184 TEMP 064
POT ADJ: 139 BAT VOL: 204
INCH COUNTER DATE SET 11/14/94
TOTAL LABEL LENGTH IN INCHES 000000170
Figure 2-9
Explanation of the Configuration Test Label
The following is an explanation of the Configuration Label in Figure 2-9.
THU NOVEMBER 17, 1994 12:25 321
This line contains the date and time. You can set the date using Performance Series
Software.
VER BA - 03.02 04/08/94
This line contains the PA/4000’s firmware version level.
SYSTEM ROM CHECKSUM 8F7B IS GOOD
FONT ROM CHECKSUM 2E7A IS GOOD
SYSTEM ROM CHECKSUM BDF5 IS GOOD
SYSTEM RAM CHECKS GOOD
These lines list the results and values of all RAM and ROM Checksums.
SERIAL PORT BAUD RATE IS 9600
This line contains the PA/4000’s Serial Port baud rate setting.
TRANSFER SWITCH IS ON
This line states whether the Transfer setting is ON or OFF.