Specifications

PA/4000 User’s Manual
Section 4, Installation
Page 9
4.8 Mounting the Air Filter Assembly to the Stand
The filter assembly comes equipped with an OSHA approved air shut-off valve [F]. To
turn on the air, push the OSHA approved shut-off valve up (Open) [D].
Parts: 1 Air filter assembly with screws
Assembly: Attach the air filter assembly to the stand with the provided Allen
bolts
[A]
using a 3/16 inch Allen wrench. Attach the ground cable
from the main unit to the screw indicated at
[B]
. This ground cable
provides ground bonding between the stand upright and the
PA/4000 Main Unit. Attach the air output hose from the main unit
to
[C]
. Attach the factory input air hose to
[G]
. Use clean
unlubricated air supply (95-120 psi – 3 cfm).
NOTE: To warn others not to turn on the air until the
PA/4000 can be serviced, “Tag“ the air shut-off valve
[E]
when it is in the closed position. Tag the unit in accordance
with OSHA policies.
[D]
[E]
[F]
[B]
[A]
[C]
[G]