Specifications

PA/4000 User’s Manual
Section 4, Installation
Page 19
Bottom Up Application
In this configuration, the PA/4000 applies labels to the bottom panel of
a carton. The distance from the tamp plate to the floor must be greater
than 30 inches and less than 65 inches.
4.16 Final Positioning
1. Disconnect power cords and the air line if they will hinder the
movement of the PA/4000.
2. Unlock casters.
3. Carefully push the PA/4000 into its position next to the conveyor.
4. Bolt the PA/4000 to the floor through the holes in the t-base.
5. Make necessary connections such as power cords, airline and
photosensor cable.