Specifications

PA/4000 User’s Manual
Section 5, Configuration
Page 9
5.2.1 Error or Indications Menu
The Error Menu indicates problems the system is currently experiencing. An
error messages will appear on the Hand-Held Terminal display screen. When
the red Error LED lights on the hand-held terminal, you will need to check
the Error Menu by holding down the 2nd key and pressing the
MENU/SELECT key twice.
There are five possible error messages that could appear on the LDC display
screen:
• Ribbon Out – When the ribbon in the printer is completely depleted,
the RIBBON LED will flash and the ERROR LED will stay lit. Replace
the ribbon, clear the error and resume printing.
• Ribbon Low - The ribbon in the printer is nearly depleted and should be
changed soon. The RIBBON LED will flash when this occurs.
• Label Low - The label stock in the printer is nearly depleted and should be
changed soon. The LABEL LED will flash when this occurs.
• Printer Error – Whenever a mechanical problem has interrupted
printing, the ERROR LED and LABEL LED will flash.
• Printer Paused - The Printer Paused error message will appear if
either of the following occurs: The PAUSE switch is pressed or a
print job is canceled with the STOP/CLEAR key.
To clear an error in the printer, press PAUSE, FEED and then PAUSE again to
resume operation.